Mining engineering safety is concerned with the safe, and sustainable recovery of mineral resources.
Throughout the cycle of mining, from construction to decommissioning, mining engineers apply specialist knowledge to determine the properties of the rockmass, ore body or coal seam and to predict how each respond to the various mining options. The specialist may recommend which mining option is best, what angle to make the walls of an open cut mine, dimensions for quarry benches, underground roadways, drives and shafts, how to support the excavations and what type of equipment is best suited to cutting or drilling in the mine.
Other mining engineers are required with specialist knowledge in areas such as ventilation, mine gases, blasting and ground vibration, machinery design, training, marketing and environmental engineering.
Mining engineering safety is integrated with both electrical and mechanical engineering safety for overall mine safety.
Periodic audits of dust explosion management plans
Clause 36(m) of the Coal Mine Health and Safety Regulation 2006 requires that periodic audits be undertaken of a mine's dust explosion management plan. It is the responsibility of the mine to arrange for these audits to take place.
- The audits should be undertaken at least once per year.
- The audits must be undertaken by a licensed auditor – a list of registered license holders is available below.
- The operator must receive a report from the auditor as to whether or not the system is being followed and if its aims are being achieved.
- The operator must provide a copy of the report to the Chief Inspector and an industry check inspector.
- List of registered and approved gas detection and monitoring plant and items
- Survey and drafting directions
|Register of licence holders for auditing of ventilation arrangements||32KB|
|Register of licence holders for auditing of dust explosion management plans||48KB|
|Licences for sampling and analysis of diesel engine exhaust||48KB|